| ASTM Standards |
| |
|
| D412 |
Vulcanized Rubber & Thermoplastic Elastomers - Tension
|
| D624 |
Tear Strength of Vulcanized Rubber and Thermoplastic Elastomers |
| D638 |
Tensile Properties of Plastics |
| D648 |
Deflection Temperature of Plastics under Flexural Load |
| D751 |
Coated Fabrics (Dimensions & Mass, Breaking Strength (Prod. A-Grab Test Method, Prod B - Cut Strip Test Method), Elongation, Bursting Strength, Puncture Resistance, Tearing Strength (Prod. A - Pendulum Method, Prod B - Tongue Tea |
| D790 |
Flexural Properties of Plastics and Insulating Materials |
| D880 |
Tensile Properties of Thin Plastic Sheeting |
| D882 |
Tensile Properties of Thin Plastic Sheeting |
| D903 |
Peel or Stripping Strength of Adhesive Bonds |
| D905 |
Strength of Adhesive Bonds in Shear by Compression |
| D1002 |
Shear Strength of Single Lap Adhesive Bonds |
| D1004 |
Initial Tear Resistance of Plastic Films |
| D1424 |
Tear Resistance of Fabrics (Elmendorf Method) |
| D1708 |
Tensile Properties of Plastics by Microtensile Specimens |
| D1709 |
Impact Resistance of Plastic Film by the Free-Falling Dart Method. |
| D1876 |
Peel Resistance of Adhesives |
| D1894 |
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
| D1922 |
Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
| D2463 |
Drop Impact Resistance of Blow-Molded Thermoplastic Containers (Procedure A - Static Drop Height Method, Procedure B - Bruceton Staircase Method) |
| D3330 |
Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
|
| D3420 |
Pendulum Impact Resistance of Plastic Film |
| D3759 |
Breaking Strength and Elongation of Pressure-Sensitive Tape |
| D3763 |
Puncture Properties of Plastics Using Load and Displacement Sensors |
| D5420 |
Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
|
| D5628 |
Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass) |
| D6272 |
Flexural Properties of Unreinforced and Reinforced PLastics of Electrical Insulating Materials by Four-Point Bending |
| D6992 |
Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| D7192 |
High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors |
| D7234 |
Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
| F623 |
Performance Specs for Foley Catheters
|
| F1306 |
Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates |
| F1929 |
Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
|
| F2051 |
Standard Specification for Implantable Saline Filled Breast Prosthesis |
| F2132 |
Puncture Resistance of Materials Used in Containters for Discarded Medical Needles and other Sharps |
| |
|
ISO Standards
|
| |
|
| 594-1 |
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment
|
| 594-2 |
Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment -- Part 2: Lock fittings |
| 5636 |
Paper & Board - Determination of air permeance and air resistance (medium range)
|
| 7864 |
Sterile hypodermic needles for single use |
| 7886-1 |
Sterile Hypodermic Syringes. Part 1: Syringes for manual use |
| 7886-2 |
Sterile Hypodermic Syringes. Part 2: Syringes for use with power-driven syring pumps |
| 7886-3 |
Sterile Hypodermic Syringes. Part 3: Auto-disable syringes |
| 8537 |
Sterle single-use syringes, with or without needle for insulin
|
| 9626 |
Stainless steel needle tubing for manufacture of medical devices |
| 10282 |
Single Use Sterile Rubber Gloves |
| 10555-1 |
Sterile, single-use intravascular catheters – Part 1: general requirements |
| 10555-2 |
Sterile, single-use intravascular catheters – Part 2: Angiographic catheters |
| 10555-3 |
Sterile, single-use intravascular catheters – Part 3: Central venous catheters |
| 10555-4 |
Sterile, single-use intravascular catheters – Part 4: Ballon dilataion catheters |
| 10555-5 |
Sterile, single-use intravascular catheters – Part 5: Over-needle peripheral catheters |
| 10846-1 |
Measurement of vibro-acoustic transfer properties of resilient elements |
| 11070 |
Sterile Single-use Intravascular Catheter Introducers |
| |
|
|
TAPPI Standards
|
Services 
